Home / Floor Lamp / World Market Tripod Lamp

World Market Tripod Lamp

Marie Burch Floor Lamp November 15th, 2018 - 06:03:08

This tripod lamps and it's a lot easier than you think. So, let's get started sounds great. So here's what you need three pieces of clear pine, one by three lumber six feet, long, it's easy to find an abandoned, your local big box store or you can go to a lumberyard. The other piece of wood you'll need is a length of closet rod. One and a quarter inches in diameter. You will also need what's called a lamp harp and light socket and a threaded mounting rod about two inches long.

You can get that at a hardware store or order it online and you'll need some lamp wire, but more on that later, the three tools that we use are a handheld jigsaw a drill, driver and a small belt sander. You can get the job done with a random orbit sander, but it will just take a lot longer. The first thing we did was to cut the legs to it now to shave the leg onto one of these pieces upon first mark a line at one inch from the edge here and four inches down from the top then connect.

The dots then go to the other end of the leg and mark a line at one inch from the outside edge. So we can get a clear shot at the line we'll be cutting, then clamp it in place and this quick grip, clamps weren't perfect for this task, but c-clamps or any other type of just fine to put the saw on the lumber and turn it on this size battery-powered, so you don't need to worry about dealing with the cord.