Nola Perry Floor Lamp November 16th, 2018 - 11:19:24
The floor lamp design, which could be assembled without any welding, we picked up a 20 foot by 10 inch sheet of quarter inch, steel from a local Chicago steelyard, had them cut it to manageable sizes and then got to work, cutting down the Back legs for the lamp we use, scrap plywood as a guide to start the 30 degree cuts with our angle, grinders and then removed the plywood. Once we had a nice groove to finish off the cup.
Since the beam was eight inches wide, we decided to go ahead and cut the back legs down to eight inches. Well, so they matched the width of the beam. We then took the rear legs over to the drill press so that we could drill the holes to attach the legs to the beam and to the wooden feet that I was going to make later. Since we were drilling into steel, we made sure to use plenty of oil and started with smaller drill bits and worked our way up to the drill bits for the 1/4 inch lag screws that would attach the legs to the beef.
With a flap disc to removing burrs and rough edges before we screwed the rear legs to the beat, you'll notice. We haven't yet cut the front legs for the lamp. We waited because we wanted to attach the rear legs and hold up the lamp so that we could visually try out different arrangements of the front leg. Before cutting the steel to size.
We ended up cutting the base of each front leg at 20 degrees and the top side of each front leg at 10 degrees road hitting the opposite direction from the 20-degree face angle. Before going further on the lamp assembly, it was time to create the cutout for the LED strips, which would also have a rabbit to receive a matching acrylic piece that would serve as a diffuse for the cutout, an acrylic diffuse.
Copyright © 2019 rmhnashville.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. 8 inch wall clock white bathroom vanity string lights soap dispenser toilet seat best rocking chair round tablecloth bathroom sinks linen tablecloth outdoor decor best accent chair.