Keisha Ramirez Floor Lamp September 14th, 2018 - 04:23:28
Three light floors. Lamp base before we get started, I'm going to show you the tools you're going to need to use. These are the tools you'll need, you'll need, a pair of wire cutters and strippers electrical tape, wire connectors and also red 271. Okay, I want to say a couple of things about this thread locker 271. It will set up in 10 minutes, but it takes a full 24 hours to cure, but once it cures it is on there solid. It will not come off this stuff. Right here has to be heated at 450 degrees for 5 minutes before it actually will loosen up where you can actually get the part out all right.
The first thing I want to say is you may or may not have to cut your wires. I did strictly because, when I put the thread Locker on this piece right here, the wire itself just that little bit of wire was moving this around and it wouldn't sit flush and I needed to it for it to sit flush so that it can sit flush With the base, so I had to cut the wire. That was the only way I could do. It then won't come back with wire, connectors, and wire connects, those wires together to that and to the rest of the lamp - and this is the piece right here that has to be flush at the bottom of the base.
Now I want to show you the threads here are the threads on the inside, and then you have these threads right here that you need to put thread locker on to this piece. Not this piece, that's the only way I can show you this. Another thing also is: is this has two little flat sides on it? Don't know why, but it does, and it is already connected with some kind of thread Locker of some sort. This one is was completely round all the way around.
Copyright © 2019 rmhnashville.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Modern wall clock double bathroom vanity solar string lights soap dispenser toilet seat warmer antique rocking chair square tablecloth ikea bathroom sinks linen tablecloth outdoor light best accent chair.